Garmin GPS 12MAP - Manual (Page 68)

58
REFERENCE
Route List
The Route List shows all
routes currently stored
in memory. Highlight the
desired route and press
ENTER to view the
Route Plan Page.
Activating a route tells
the GPS 12 MAP you
want to use this route for
guidance.
The GPS 12 MAP’s Route List displays all the
routes currently stored in memory, along with a
descriptive name for each route. Once a route
has been created, it can be activated and used
for navigation from the Route List. A route may
be followed in the same sequence as it was
originally created, or you can invert the route
and navigate from the end waypoint back to the
beginning waypoint.
To activate a route:
1. Press MENU twice to display the Main Menu.
2. Highlight ‘Routes’ and press ENTER. The Route
List is displayed, showing all routes stored in
memory.
3. Highlight the desired route and press MENU to
display the Route Options.
4. Highlight ‘Activate’ and press ENTER to navigate
the route in sequence.
To deactivate the route and stop using it
for navigation:
1. Press PAGE repeatedly to display the Active
Route Page. (See page 62.)
2. Press MENU to display the Active Route Options.
3. Highlight ‘Deactivate’ and press ENTER to stop
navigating the currently selected route.
The Route List also allows you to enter your
own 13-character name for any listed route. By
default the name includes the first and last
waypoints in the route.
To enter a custom route name:
1. Press MENU twice to display the Main Menu.
2. Highlight ‘Routes’ and press ENTER. The Route
List is displayed, showing all routes stored in
memory.
3. Highlight the desired route and press ENTER to
display the Route Plan Page.
4. Highlight the name field and press ENTER to
begin editing.
5. Use the rocker keypad to enter the desired name
and press ENTER when finished.