Tracks, Using a track log, Gps navigation – Garmin GPS 60 User Manual
Page 39
29
GPS Navigation
Using a Track Log
The Tracks feature creates an electronic trail on the Map Page as you
move. This trail is called a Track Log, and it contains information about
points along its path, including time, position, and elevation.
You can use a Track Log to do the following:
• Record and save your movements for a given time and place.
• Measure the area of any space you encompass.
• Retrace your path.
To create a Track Log:
1. Press and release the
PAGE
key until you see the Main Menu Page.
Then use the
ROCKER
key to highlight ‘Tracks’ and press
ENTER
.
2. Make sure the ‘On’ button next to Track Log is highlighted. If not,
use the
ROCKER
key to highlight it and press
ENTER
.
3. To set up a track log, highlight ‘Setup’ and press
ENTER
to display
the Setup page. Select ‘Wrap When Full’ to continue recording when
full by overwriting the oldest data with new. (Continued on next
page.)
Tracks
The Tracks Page