Gps navigation, The setup menu – Garmin GPS 60 User Manual
Page 53
43
GPS Navigation
To change the Serial Data Format:
1. From the Setup Menu, highlight ‘Interface’ and press
ENTER
.
2. Highlight the ‘Serial Format’ field and press
ENTER
.
3. If you select Text Out and/or RTCM In, additional fields will appear.
Use the
ROCKER
key to highlight ‘Baud Rate’ and press
ENTER
. Use
the
ROCKER
key to highlight the desired setting and press
ENTER
.
4. For Garmin DGPS or RTCM In/NMEA Out, use the
ROCKER
key to
highlight ‘Beacon’ and press
ENTER
. Use the
ROCKER
key to select
‘Scan’ or ‘User’ and press
ENTER
.
If you select ‘Scan,’ the GPS 60 will automatically direct the beacon
receiver to scan for available beacon transmitters.
If you select ‘User,’ select the ‘Freq’ and ‘Bit Rate’ fields and enter
the appropriate settings. The beacon status, signal-to-noise ratio and
distance to beacon are displayed in the bottom of the page.
The Setup Menu