Garmin GPS 60 - Manual (Page 54)

44
GPS Navigation
Tones Setup
The Tones Setup Page allows you to customize the signal tones for a
variety of unit features.
To change or mute tones:
1. From the Setup Menu, highlight ‘Tones’ and press ENTER .
2. Use the ROCKER key to highlight the tone you want to change and
press ENTER . As you scroll down the list of tones, you will hear an
example of each tone. Choose the tone you want to hear and press
ENTER . To mute all tones, highlight ‘Mute’ and press ENTER .
Page Sequence Setup
The Page Sequence Setup Page allows you to reorder any of the Main
Pages and add additional pages to the Main Page cycle. If you add a page
to the sequence, it no longer appears in the Main Menu.
To move, insert, or remove a page:
1. From the Setup Menu, highlight ‘Page Sequence’ and press ENTER .
2. To move a page in the order, highlight the page and press ENTER .
Select ‘Move,’ then move Up or Down until the desired position is
displayed and press
ENTER .
3. To insert a new page, highlight the page after the point where you
want to insert and press ENTER . Select ‘Insert,’ then choose a page
from the displayed list and press ENTER .
4. To remove a page, highlight the page and press ENTER . Select
‘Remove’ and press ENTER .
The Setup Menu
Choose from nineteen different tones for each field, or choose
‘Off’ to turn the tone off for that field.