Reference waypoint lists – Garmin GPSMAP 172C User Manual

Page 47

Advertising
background image



Reference

Waypoint Lists

You can also search for a waypoint by name:
1. Highlight the name field and press ENTER.
2. Use the

ARROW KEYPAD to select the first letter of

the name.

3. Move to the RIGHT and enter the second letter if you do

not see it on the list below.

4. Repeat this until the name appears. Press

ENTER when

you see the name.

5. Highlight the name on the list and press

ENTER again

to review the waypoint. When done, highlight ‘OK’ and
press ENTER.

Once a waypont s deleted from the lst, t cannot be recovered from the unt. It s
advsable to backup mportant wayponts to a computer usng an optonal PC cable
and nterface software, save them to a data card, or wrte them down by hand.

To delete an individual waypoint from the ‘User’ list:

1. Use the ARROW KEYPAD to highlight the waypoint to be deleted.
2. Press

MENU, highlight ‘Delete Waypoint’ and press ENTER.

OR, press ENTER, highlight ‘Delete’ and press ENTER.
3. Press the

ENTER key to confirm the deletion warning.

To delete waypoints by symbol:

1. From the ‘User’ tab, highlight the waypoint to be deleted and press MENU, then select ‘Delete By

Symbol’ and press ENTER.

2. Use the

ARROW KEYPAD to highlight the symbol of the waypoint(s) to be deleted and press

ENTER.

3. Press

ENTER to confirm. Choose ‘Cancel’ or press QUIT to stop the deletion.

To delete all user waypoints:

1. Press the MENU key to select the options window.
2. Use the

ARROW KEYPAD to highlight ‘Delete All’ and then press ENTER.

3. Highlight the ‘OK’ prompt and press ENTER to confirm.

Proximity Waypoint List

The ‘Proximity’ submenu of the Points tab lets you define an alarm circle around a stored waypoint

position, and can be used to help you avoid reefs, rocks, or restricted waters. Up to ten waypoints may
be listed, with a maximum alarm radius of 99.99 nautical or statute miles or kilometers. If a proximity
alarm circle overlaps with an existing alarm circle, the message ‘Proximity Overlaps Another Proximity
Waypoint’ appears. Since the unit only alerts for one of the overlap points, use caution when navigat-
ing in these areas. If you enter an alarm circle overlap, you are only alerted to the closest proximity
waypoint.

F

Name
Field

Waypoint
List

Advertising