Garmin GPS 150 - Manual (Page 48)

To delete a waypoint from the Proximity Waypoints page:
1. Rotate
K
to display the waypoint you would like to remove.
2. Press
C
, if necessary, to obtain a cursor.
3. Rotate
O
to highlight the waypoint you would like to remove.
4. Press
\
to erase the name and then
E
to delete.
If you enter the proximity region, a ‘Prox alarm - press NAV’ message will be
displayed. Pressing NAV will display the Position page, and the proximity waypoint’s
identifier, range and bearing will be listed in the proximity field at the bottom of the page.
User Waypoint Catalog
The User Waypoint Catalog is available to quickly scan, edit, activate, rename, or
delete user waypoints.
To display the User Waypoint Catalog:
1. Press
W
and rotate
O
until the User Waypoint Catalog is displayed.
2. Rotate
K
to scroll through all of the available user waypoints.
When the User Waypoint Catalog is displayed, notice that any waypoint which is
contained in a route or acts as a proximity waypoint is designated. To edit, activate,
rename, or delete waypoints, the desired waypoint must be highlighted.
To highlight a waypoint that is displayed on the User Waypoint Catalog:
1. Press
C
and rotate
O
until the desired waypoint is highlighted.
38
REFERENCE
Proximity Waypoints &
User Waypoint Catalog
Section
2
User Waypoint Catalog
150man rev E 7/24/98 3:10 PM Page 38