Gps self test failure 100, Gps sensor lat/lon failure 100, Gps raim not available 100 – Garmin SL60 User Manual
Page 110: Gps raim position error 100, Gps hdop position error 100, Failure 100, Gps self test failure, Gps sensor lat/lon failure, Gps raim not available, Gps raim position error
GPS Self Test Failure
If the GPS self-test fails, a message displays
indicating the cause of the failure in four hex digits.
It becomes an old message after viewing.
GPS Self Test Failure: 1FFF
GPS Sensor Lat/Lon Failure
When the GPS sensor cannot compute the latitude
and longitude, the following message displays. It
becomes an old message after viewing.
GPS Cannot Compute Lat/Lon
GPS RAIM Not Available
When RAIM detection is not available for the GPS
sensor, a warning is generated. The current flight
phase is displayed first (either Terminal or
Enroute). It becomes an old message after viewing.
Enroute GPS RAIM Not Available
GPS RAIM Position Error
When RAIM detection is available for the GPS
sensor and it detects a RAIM alarm, a warning is
generated. The current flight phase is displayed first
(either Terminal or Enroute). It becomes an old
message after viewing.
Terminal GPS RAIM Position Error
GPS HDOP Position Error
When the HDOP for the GPS sensor exceeds
current flight phase HDOP requirements, a warning
is generated. The current flight phase is displayed
first (either Terminal or Enroute). It becomes an old
message after viewing.
Terminal GPS HDOP Position Error
100
Message Function