Garmin SL60 - Manual (Page 63)

Direct-To
If the leg page displayed is the currently active leg
of the Active flight plan, and a Direct-To waypoint
has been entered, the From waypoint will say
“Direct.” The leg just prior to the currently active
leg displays the leg as if the “direct” waypoint did
not exist. After sequencing, the “Direct” disappears,
and the currently active leg once again displays the
waypoint identifier. See page 36 for more details on
using the Direct-To function.
1** Direct
N a6S4
034
0 39.3nm
Manual Leg
Activation
While viewing a leg page of the Active flight plan,
pressing ENT will provide the option for making
the displayed leg the active leg.
3* Press ENT to Activate leg
Flight Plan
Editing
You can alter any of the information you entered
into the flight plans. The editing options include:
Chg?, Ins?, and Del?
— Chg? - An existing waypoint can be changed.
— Ins? - A waypoint can be inserted before an existing
waypoint. Inserting a new waypoint into the Active
flight plan before or after the current leg does not
affect the currently active leg. Inserting a new
waypoint before the active leg’s To waypoint will
immediately change navigation to the new To
waypoint.
— Del? - An existing waypoint can be deleted if it is
not one of only two waypoints in the Active flight
plan. A Direct-To waypoint can always be deleted.
When the “Direct” indicator is deleted, the
waypoint that was overwritten by “Direct” will
return as the original From waypoint. If you delete
the current To waypoint, the Next waypoint, if
available, becomes the current To waypoint. If the
last To waypoint is deleted, the previous From
waypoint becomes the current To waypoint and the
53
Flight Plan Functions