Bosch GKS Professional 55 - Manual (Page 16)

16 | English
2 609 932 800 | (5.7.11) Bosch Power Tools
14 Lever for retracting blade guard
15 Base plate
16 Wing bolt for bevel-angle preselection
17 Sawdust ejector
18 Blade guard
19 Handle (insulated gripping surface)
20 Clamping bolt with washer
21 Clamping flange
22 Saw blade*
23 Mounting flange 24 Saw spindle
25 Extraction adapter*
26 Clamping lever for cutting-depth preselection
27 Cutting-depth scale
28 Set of screw clamps*
29 Guide rail*
30 Connection piece*
31 Vacuum hose*
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Technical Data
Noise/Vibration Information
Measured sound values determined according to EN 60745.
Typically the A-weighted noise levels of the product are:
Sound pressure level 92 dB(A); Sound power level
103 dB(A). Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a
h
(triax vector sum) and uncertainty K
determined according to EN 60745:
Cutting wood: a
h
=2.5 m/s 2 , K=1.5 m/s 2 ,
Cutting metal: a
h
=3.5 m/s 2 , K=1.5 m/s 2 .
The vibration emission level given in this information sheet
has been measured in accordance with a standardised test
given in EN 60745 and may be used to compare one tool with
another. It may be used for a preliminary assessment of expo-
sure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained,
the vibration emission may differ. This may significantly in-
crease the exposure level over the total working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working pe-
riod.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.
Circular Saw GKS 55
Professional
GKS 55 GCE
Professional
Article number 3 601 F64 0.. 3 601 F64 9..
Rated power input W 1200 1350
No-load speed min -1 5200 2100 – 5100
Rotational speed under load, max. min -1 3800 4900
Cutting depth, max.
– for 0° bevel angle
– for 45° bevel angle
mm
mm
55
38.5
55
38.5
Spindle lock z z
Speed preselection – z
Constant electronic control – z
Reduced starting current – z
Base plate dimensions mm 145 x 290 199 x 300
Saw blade diameter, max. mm 160 160
Saw blade diameter, min. mm 150 150
Blade thickness, max. mm 1.8 1.8
Tooth thickness/setting, max. mm 2.6 2.6
Tooth thickness/setting, min. mm 1.8 1.8
Mounting bore mm 20 20
Weight according to EPTA-Procedure 01/2003 kg 3.5 3.9
Protection class / II / II
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
Please observe the article number on the type plate of your machine. The trade names of the individual machines may vary.
OBJ_BUCH-244-006.book Page 16 Tuesday, July 5, 2011 7:44 AM