Dell XPS M1730 - Manual (Page 41)

3. Remove the screw securing the audio connector board.
4. Remove the audio connector cable from the system board.
5. Remove the audio connector board by lifting it up.
Removing the Consumer Infrared Board
1. Follow the instructions in Before You Begin .
2. Remove the palm rest (see Palm Rest ).
3. Remove the two screws securing the consumer infrared board.
4. Remove the infrared connector cable from the system board.
5. Remove the consumer infrared board by lifting it up.
Back to Contents Page
1 screw 2 audio connector cable
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
1 screws (2) 2 infrared connector cable