System features, Performance features, Scalability features – Dell PowerVault MD3000i User Manual

Page 5: Availability features

Advertising
background image

Getting Started With Your System

3

System Features

This section describes the major hardware and software features of your
system. It also provides information about other documents you may need
when setting up your system and how to obtain technical assistance.

Performance Features

667-MHz Intel

®

XScale

®

processor

512-MB high-speed data cache memory

Scalability Features

Capacity for 15 1-inch, hot-plug, 3.0-Gbps, serial-attached SCSI (SAS)
physical disks.

Support for up to two daisy-chained storage enclosures for a total
of 45 physical disks.

Controller capable of supporting sessions from 32 iSCSI initiators
(16 hosts with redundant connections) simultaneously with multiple
connections per session. For more information, refer to the

Dell

PowerVault MD Systems Support Matrix at support.dell.com.

Support for a wide range of servers. (For additional support information,
refer to the

Dell PowerVault MD Systems Support Matrix at

support.dell.com).

Support for both simplex (single controller) and duplex (dual controller)
array configurations.

Availability Features

Up to two active/active RAID controller modules (duplex configuration)
for redundant data and system management capability; simplex
configuration also available

Battery backup unit (BBU) to power the RAID controller system memory
(cache) for a minimum of 72 hours in case of a power outage

Redundant hot-plug power supply and cooling modules that are combined
for easy serviceability

Advertising