Dell PowerConnect 3024 - Manual (Page 16)

14 Po w e r C o n n e c t S y s t e m I n f o r m a t i o n G u i d e
www
.dell.com | support.dell.com
4 Type your password again to confirm it and press <Enter>.
5 Press <Ctrl><w> to save your changes.
NOTE: If you enable password protection without setting your own
password, the default password is switch.
IP Address Assignment
Before you can assign an IP address to the switch, you must obtain the
following information from your network administrator:
• IP address for the switch
• Default gateway for the network
• Network mask for this network
To assign an IP address to the switch:
1 From the Main Menu, select System Manager and press <Enter>.
2 Select IP Settings.
3 In the first field, type the correct IP address for the system.
4 Enter the IP address of the default gateway for the network to which
the switch belongs.