Dell PowerConnect 3024 - Manual (Page 17)

Po w e r C o n n e c t S y s t e m I n f o r m a t i o n G u i d e 15
5 Enter the network mask for this network.
6 Press <Ctrl><w> to save your changes.
7 After you make IP changes, restart the system.
8 Press <Esc> twice to return to the Main Menu.
9 Select System Manager and then select Reset to restart the switch.
Confirm the reset.
NOTICE: You must restart the system from the System Manager/Reset page
for the changes to take effect.
Connecting Devices to the Switch
At this point, you are ready to use appropriate network cabling to connect
devices to the switch’s RJ-45 connectors.
To connect a device to a GBIC port:
1 Use your cabling requirements to select an appropriate GBIC
module type.
2 Insert the GBIC module (sold separately) into the GBIC slot.
3 Use the appropriate network cabling to connect a device to the
connectors on the GBIC module.
Regulatory Information
Electromagnetic Interference (EMI) is any signal or emission, radiated in
free space or conducted along power or signal leads, that endangers the
functioning of a radio navigation or other safety service or seriously
degrades, obstructs, or repeatedly interrupts a licensed radio
communications service. Radio communications services include but are
not limited to AM/FM commercial broadcast, television, cellular services,
radar, air-traffic control, pager, and Personal Communication Services
(PCS). These licensed services, along with unintentional radiators such as
digital devices, including computer systems, contribute to the
electromagnetic environment.