M-AUDIO Dman 2044 - Manual (Page 9)

9
DMAN 2044 Typical System Setup
Configuring DMAN 2044 Input Gain
Each DMAN 2044 audio input channel may be configured to accept
either -10 dB or +4 dB signal levels. This configuration is accomplished
by installing or removing a hardware jumper for each channel. An
installed jumper (factory default) selects -10 dB; a removed jumper
selects +4 dB. For best signal-to-noise performance, use the +4 dB setting
and set your audio source louder than you would if using the -10 dB set-
ting.
Input Signal-Level Jumper Positions
MIDIMAN DMAN2044
JP1
JP2
JP3
JP4
Audio
DMAN 2044
In 1
Left
Right
Main In
Amplifier
Mic
CD Player
In 2
Mic Preamp
Keyboard
In 3
In 4
Right Out
Left Out
Line Mixer
In 4 In 3 In 2 In 1
Out 1
Out 2
Out 3
Out 4