A.14.1 communication via rs-232, Appendix – American Magnetics 05100PS-430-601 High Stability Integrated Power Supply System User Manual
Page 195
Advertising
![background image](/manuals/252970/195/background.png)
Rev. 5
177
Appendix
Remote Computer Communication (RS-232)
discharge using a unipolar supply. The process was described earlier in
section A.13.2 on page 174; (Figure A-4 is repeated here for convenience):
A.14 Remote Computer Communication with the Model 430
A.14.1
Communication via RS-232
1. Using serial a null modem cable, connect the DB9 RS-232
connector on the rear of the Model 430 Programmer to a serial
connector on the computer.
2.
Start a terminal
emulator program on
the remote computer.
As an example, this
procedure will use the
HyperTerminal
program running on a
Windows machine.
Advertising