American Magnetics 4Q06250PS-430 High Stability Integrated Power Supply System - Manual (Page 182)

164 Rev. 5
Appendix
Power Supply Details
Altitude sea level to 10,000 feet Consult factory for derating.
Safety Certification AC power EN 61010-1 CE Mark
Dimensions
English 5.25” X 19" X 21.5"
H X W X D
Metric 133.3 mm X 482.6 mm X 546.1 mm
Weight
English 53 lbs
Metric 24.1kg
Connections and
Controls
Source power 3-pin IEC connector
Configured by AMI Factory
Load connections Nickel-plated copper bus bars
Sensing Output
Terminal Block
7-pin terminal block
Analog I/O control port 15-pin D female
Crowbar
Characteristics
Maximum current: 150 A
Short-circuits the output when there is an
internal fault (front panel FAULT LED is on)
or when there is a loss of input power.
Maximum voltage 48 V
Contact resistance 0.3 milli-ohms @100 A (typical)
On/off timing 25 mS (typical)
Table A-13. Model 4Q06125PS Electrical Specifications (Continued)
Specification Rating / Description Condition