Blue Ox BX88193 - Manual (Page 14)

Disconnecting
This section will provide disconnecting information about the Apollo®.
Perform these steps each time you remove the Apollo.
1. Unplug the Apollo’s power cord from the 12-volt accessory outlet.
2. Push and hold the Drain button located on the control panel of the Apollo to release the air
pressure.
3. Adjust the driver’s seat back.
4. Unhook the brake bracket from the brake pedal. Unplug the Breakaway clips from the Apollo
control panel (if applicable).
5. Lift the Apollo out of the vehicle.
11 of 18 292-2658 Date 09/06
Failure to drain your Apollo’s air
system and unplug the unit from
the car’s power source could
cause the Apollo to activate when
removing it from the vehicle,
resulting in injury to yourself and/
or others within the proximity.
! CAUTION