AASTRA 4147 Medium for MX-ONE (TSE) User Guide EN - Manual (Page 8)

Description
Dialog 4106 Basic/Dialog 4147 Medium 8
1 Programmable keys
Three keys for storing frequently used numbers. You can store one
number per key, see section “ Dial by a function key ” on page 27.
Note: If you unplug the telephone, stored numbers will
remain for about 24 hours.
2 Mute / Prog
a. Switch microphone on or off. See section “ During Calls ” on
page 34.
b. Enter programming mode. See section “ Settings ” on page 60.
3 Message Waiting key
a. A flashing light indicates a waiting message. See section
“ Messages ” on page 52.
b. Programmable key to store of one frequently used number. See
section “ Dial by a function key ” on page 27
4 Last number redial / Pause key
a. Redial last dialed number. See section “ Last Number Redial ” on
page 21.
b. Insert a pause if you have to wait for dial tone when
programming a number into the memory. See section “ Wait for
dial tone ” on page 19.
5 R-key
Used for example to make an inquiry, to transfer a call or to
establish a conference, see section “ During Calls ” on page 34.
6 Volume control
Adjust the volume.
7 Message Waiting switch
Switch Message Waiting indication on or off. Also used to reverse
the polarity in case of crossed line cables. See section “ Settings ”
on page 60.
8 Loudspeaker (beneath handset)