Installation, Install cables, Change cables – AASTRA 4422 IP Office for BusinessPhone User Guide User Manual
Page 110: Ection
Advertising
![background image](/manuals/253236/110/background.png)
Installation
BusinessPhone – Dialog 4422 IP Office
110
Installation
Install Cables
The handset cable has to be plugged in “HANDSET”, and the cable
to the local area network has to be plugged in “LAN”. If an external
power adapter is used this has to be plugged in “POWER”. You
can put the cable to the handset in the notch underneath the
telephone. When only one single wall terminal for the local network
is available, a PC can be connected to "PC" to be connected to the
network via the phone.
Change cables
To remove a cable, use a screwdriver to unlock the stop.
Handset cable to the left
Handset cable to the right
Advertising