AASTRA 600d (GAP) User Manual EN - Manual (Page 55)

49
Devices menu
"Call filter" menu
The call filter* allows you to answer or block incoming calls. The Accept List setting only allows the
call numbers in the call number list to be signalled (no other calls). The Block List setting means all
calls are signalled except the calls from the call numbers in the list. The call number list can contain
10 entries.
Status You can change the filter mode.
Accept list
Calls for the call numbers entered in the list are accepted.
Block list
Calls for the call numbers entered in the list are rejected.
Filter off Call filter is deactivated.
List of numbers
Shows the entries in the call number list. If the list is empty, press the New softkey.
Name Enter a name for the call number.
Number Enter the call number. This entered caller number must correspond exactly to
the call number transferred by the network.
or …
Select a call number from the list.
-> Edit The entry can be modified.
New entry Create a new entry.
Dial number... The entry will be dialled immediately.
Predial The entry will be transferred to the predial.
Add... Transfers the call number into the personal phone book
or the VIP list.
Details... Shows call number and name.
Delete The entry will be deleted.
Delete all The list will be deleted after a confirmation prompt.
* if supported by the system