Inserting standard battery – AASTRA 600d for SIP-DECT MX-ONE Quick User Guide EN User Manual

Page 14

Advertising
background image

Aastra 610d, 620d , 630d Quick Reference Guide

Aastra 610d, 620d, 630d

14

Bluetooth (Aastra 620d, 630d)

Subscribe headset:

Switch the bluetooth headset to

“Pairing mode” (see user’s manual

for the bluetooth headset)

Press softkey

and select

Settings - Bluetooth- BT Status

Press Change to switch bluetooth

on

Select Subscribe headset

Press New to register a new

Bluetooth headset.

The handset searches for BT devices

for approx 30 sec.

Confirm the found headset with OK

and enter PIN of the headset.

Status:

Press

select Settings-

Bluetooth-BT Status

Press Change to switch Bluetooth

on or off

Inserting standard battery

Aastra 610d, 620d:

Push the battery cover downwards until it disengages

from the locking mechanism and lift off. Insert the

battery with contacts downwards. Replace the battery

cover and push upwards until it snaps into place

Aastra 630d:

Undo the two screws on the back of the handset with a

suitable tool and remove the cover. Insert the battery

with the contacts downwards, close the battery

compartment with the cover (insert underneath, press

down from above) and screw back in place. Do not

damage the rubber seal when assembling

Advertising