AASTRA 6735i Installation Guide EN - Manual (Page 5)

41-001370-00 Rev 01 – 07.2011
1
Welcome
Congratulations on your purchase of the Model 6735i IP phone! The 6735i communicates over an IP Network,
allowing you to place and receive calls in the same manner as a regular business telephone. The 6735i is capable
of supporting the SIP IP protocol.
Phone Features
• 8 line graphical LCD screen (144 x 75 pixels) with white backlight
• Built-in-two-port, 10/100/1000 Gigabit Ethernet switch - lets you share a connection with your computer
• 12 programmable keys
– 6 Top keys: Programmable hard keys
(up to 6 programmable functions)
– 6 Bottom keys: Programmable state-based softkeys
(up to 20 programmable functions)
• 4 call appearance lines with LEDs
• Supports up to 9 call lines
• HD audio (wideband)
• Full-duplex speakerphone for hands free calls
• Headset support (modular connector)
• Inline power support (based on 802.3af standard) that eliminates power adapters
• Enhanced busy lamp fields*
• Set paging*
* Availability of feature dependant on your phone system or service provider
Requirements
The 6735i IP phone requires the following environment:
• SIP-based IP PBX system or network installed and running with a SIP account created for the 6735i phone
• Access to a Trivial File Transfer Protocol (TFTP), File Transfer Protocol (FTP), Hypertext Transfer Protocol (HTTP) server, or
Hyper Text Transfer Protocol over Secure Sockets Layer (SSL) (HTTPS)
• Ethernet/Fast Ethernet LAN (10/100 Mbps) (Gigabit Ethernet LAN (1000 Mbps) recommended)
• Category 5/5e straight through cabling (category 6 straight through cabling required for optimum Gigabit Ethernet
performance)
• Power source
– For Ethernet networks that supply in-line power to the phone (IEEE 802.3af ):
– For power, use the Ethernet cable (supplied) to connect from the phone directly to the network for power. (No 48v AC power
adapter required.)
– For Ethernet networks that DO NOT supply power to the phone:
– For power, use the 48V AC Power Adapter (optional equipment - not included) to connect from the DC power port on the phone
to a power source.
or
– (optional) For power, use a Power over Ethernet (PoE) power injector or a PoE switch. A PoE power injector is available as an
optional accessory from Aastra Telecom. Contact your Administrator for more information.