EVS XTnano Version 10.03 - July 2010 Configuration Manual - Manual (Page 17)

Issue
10.03.D XTnano – Version 10.03 – Configuration Manual
EVS Broadcast Equipment SA – July 2010
10
Possible Values
The values can be the following:
• LTC LTC timecode, which is automatically stored in the LTC table. It is
specified in the LTC field
• USER User-defined timecode, which is stored in the USER TC table and
specified in the USER field.
Timecode Color on the OSD
Depending on the value selected for this setting, the timecode displayed at the
bottom of the user’s OSD will have a different color:
• If the LTC timecode is selected, the timecode color will be white.
• If the USER timecode is selected, the timecode color will be yellow.
+ F2 to open the Setup screen.
the cursor on the field to edit.
e the
for that f
valu
H
OW TO
S
ETUP THE
P
RIMARY
TC
AND
U
SER
F
IELDS
To set up the primary TC or VITC field, proceed as follows:
1. Press SHIFT
2. Use the TAB key to position
3. Us LEFT and RIGHT ARROW keys to go through the possible values
ield.
The e defined when you leave the field will be saved.