Compatibility information, 1 gpi types, Gpi types – EVS XTnano Version 10.03 - July 2010 Configuration Manual User Manual
Page 24: Gpi settings (page 4), Ypes

XTnano – Version 10.03 – Configuration Manual
EVS Broadcast Equipment SA – July 2010
Issue
10.03.D
17
C
OMPATIBILITY INFORMATION
SDI Video streams (SD or HD) recorded with SMPTE 334M must be played by a
2.5
server running a version equal or higher to Multicam 8.03 to keep the 334M
information.
GPI SETTINGS (PAGE 4)
On the fourth page of the Setup Configuration module (SHIFT + F2), it is possible
to define GPI settings:
2.5.1
used on the servers:
•
OPTO GPIs, which are always GPIs IN, numbered from 1 to 4.
PIs IN to GPIs OUT or vice versa.
By default, they are GPIs IN. If TTL GPIs are already assigned when you
GPI
T
YPES
Three types of GPIs are available to be
•
Relay GPIs, which are always GPIs OUT, numbered from 1 to 4.
•
TTL GPIs, which are switchable from G
switch their type, a warning message will be displayed.