EVS XTnano Version 10.03 - July 2010 Configuration Manual - Manual (Page 31)

Issue
10.03.D XTnano – Version 10.03 – Configuration Manual
EVS Broadcast Equipment SA – July 2010
24
2.8 MULTIVIEWER SETTINGS (PAGE 10)
The Page 10 of the Setup Configuration module makes it possible to specify the
settings for a multiviewer connected to the server.
2.8.1 I
NTRODUCTION
When an optional m can monitor
ls
The server is connec
on the server backpl
• HD SDI connector
• SD SDI connector
• DB15
When th s
means the multiviewer feature is directly available and the user can specify the
multiviewer settings. Otherwise, the message !Not Detected! is displayed
on the first line of Page 10.
2.8.2 S
ETTINGS
As usual in the SHIFT + F2 screens, you move from one field to the over with the
<TAB> key and you change the value of a field by means of the arrow keys.
ultiviewer board is installed on the server, you
the server channe on a multiviewer.
ted to the display device via one of the dedicated connectors
ane:
configurable connector.
e multiviewer board is installed, Multicam automatically detects it. Thi