EVS IPDirector Version 5.9 - January 2011 Part 8 User’s Manual - Manual (Page 148)

Issue 5.9.B IPDirector Version 5.9 – User Manual – Part 8: Editing - IPEdit
EVS Broadcast Equipment - January 2011
134
E
XAMPLE
In the following example, the first method mentioned above is used. In the
example, the TC IN and TC OUT of the elements are specified on the element
block.
Element Selected for Slipping Action
The initial elements of a source clip ADL_CLP_1-00 are present in the timeline.
Their TC IN is 11:27:27:06. Their TC OUT is 11:27:28:09.
All elements of the same source clip are selected for the slip action:
During the Slipping Action
In this case, the IN point and OUT point of the elements are being shifted to the
left:
• The available A/V material on the server is represented by the light blue blocks
before and after the element boundaries.
• The TCs of the IN point and OUT point that correspond to the slip action
applied are displayed in the Timecode bar.