EVS IPDirector Version 5.9 - January 2011 Part 8 User’s Manual - Manual (Page 83)

IPDirector Version 5.9 – User Manual – Part 8: Editing - IPEdit
EVS Broadcast Equipment – January 2011
Issue 5.9.B
69
The table describes the various fields in the window above displayed:
Field/Button Description Manda-
tory ?
Name Name of the timeline in maximum 32 characters.
The field is filled with the original timeline name.
Yes
LSM ID ID identifying the timeline position in the XNet network.
• If you enter an LSM ID that is already used, the copy
will not be created and an error message will be
displayed in the Message Pane.
• If you do not enter an LSM ID, IPDirector will assign
one to the timeline.
No
Destination
XT List of all servers on the XNet network to which the
timeline can be copied. Yes
Send to Bins where a shortcut to the timeline copy can be
stored. No
Copy Type Allows you to select how the copy should be performed:
• EDL Only: this copies only the timeline definition to
the IPDirector database and to the server.
• EDL and clips “short”: this copies the timeline
definition and the clips from their IN to the OUT points
as defined in the timeline. This is the default value.
• EDL and clips “long”: this copies the timeline
definition and the clips from their Protect IN to the
Protect OUT.
No
Move Starts the move process -
Copy Starts the copy process -
Cancel Cancels the copy/move command -
H
OW TO
C
OPY OR
M
OVE A
T
IMELINE
To create a copy of a timeline, proceed as follows:
1. In the Timeline pane, right-click the Timeline Name field and select
Copy/Move Timeline. The Copy-Move Timeline window opens.
2. If requested, modify the default name and type the requested LSM ID.
2. Select the server to which you want to copy the timeline in the Server list
box.
3. In the Copy Type group box, tick the radio button corresponding to the type
of copy you want to perform.