EVS MulticamLSM Version 9.00 - March 2008 User's Manual - Manual (Page 177)

EVS Multicam - User Manual Version 9.00
EVS Broadcast Equipment SA – March 2008
168
Note
It is possible from the VGA to connect back to the last machine
connected by pressing ALT+<TAB>.
14.7 OPERATING WITH XNET
When the remote system is selected, the operation with remote clips or
remote trains is similar to the operations on the local system.
14.7.1 H
OW TO
R
ECALL
/P
LAY
B
ACK A
R
EMOTE
C
LIP
1. Select the Clip mode in the Network menu.
2. Select the Remote LSM from the list:
The LCD display returns to the normal mode
3. Select the clip page 1, 2, 3, … to 10 (PAGE key).
When selecting a XT[2], it will automatically reconnect to the page and
bank that was last used.
4. Select the bank in which the desired clip is located
5. Choose the clip required (F1 - F10).
6. If all clips are present (from Camera A, B, C and D), they will appear in
their respective locations (Channel A, B, C or D).
The label of a remote clip is different in order to identify it easily among
other clips: