EVS XTnano Version 10.04 - January 2011 Operation Manual - Manual (Page 70)

Issue
10.04.A XTnano – Version 10.04 – Operating Manual
EVS Broadcast Equipment SA – January 2011
62
9.4.3 H
OW TO
R
ECALL AND
L
OAD A
P
LAYLIST
You can only recall and load a playlist if it is not empty.
To load a playlist on a player channel, proceed as follows:
1. Access the desired playlist bank by pressing F10 from the requested page.
2. Select the playlist to load with the F1-F10 keys.
The selected playlist becomes active and is displayed on the LCD display.
3. Press PLST key on the Remote Panel to load the active playlist.
If the new playlist is not empty, it is automatically loaded on the selected player
channel (in 2 PGM mode) or on the PGM (in PGM/PRV mode) and it becomes the
current playlist.
If the new playlist is empty, the system will ask you whether you want to copy the
current playlist at this new location.
9.4.4 H
OW TO
E
XIT
T
HE
P
LAYLIST
M
ODE
Press the RECORD key on the Remote Panel to exit the playlist mode and return
to E2E mode.
9.5 DELETING PLAYLISTS
9.5.1 H
OW TO
D
ELETE A
P
LAYLIST
Deleting a playlist deletes all the playlist elements from the playlist and the
playlist definition in the database.
To delete a playlist, proceed as follows:
1. Access the playlist bank where the playlist to delete is stored, by pressing F10
from the requested page.
2. Press CLEAR + the F_ key corresponding to the playlist you want to delete.
You will be asked or not to confirm the deletion action, depending on the value
defined for the Confirm Deletion setting (in p.3.1 of the Remote Panel Setup
menu). The empty playlist location remains available.