EVS XTnano Version 10.04 - January 2011 Operation Manual - Manual (Page 80)

Issue
10.04.A XTnano – Version 10.04 – Operating Manual
EVS Broadcast Equipment SA – January 2011
72
1. Using the Playlist Edit mode or the Browse mode, scroll to the location
where the clip must be inserted.
2. Call the selected clip. It appears on the PRV output.
3. Do one of the following to insert the selected clip in the playlist, at the
position shown on the PGM output:
• Press the A key (Insert function) on the Remote Panel
• Press the TAKE key on the Remote Panel
• Press the SHIFT + Insert keys on the Remote Panel
A confirmation message will appear if that option has been enabled in the Setup
menu.
After the clip has been inserted, you can press PLST to return to the playlist at
the current position.
9.10.4 I
NSERTING
G
ROWING
C
LIPS INTO
P
LAYLISTS
Growing clips can be inserted in playlists in the same way as other clips.
However, their display has the following characteristics:
Display
They will be displayed with the ‘Creating’ message in the playlist on the VGA.
The growing clips ID will be blinking on the mini playlist display and on the playlist
screen on the Remote Panel, as well as on the OSD.
Remaining Time
The remaining time in playlists containing growing clips with only an IN point is as
follows:
The remaining time displays --:--:-- on all the screens (OSD, VGA, Remote Panel
screen) where this information is displayed.
9.10.5 H
OW TO
D
ELETE
P
LAYLIST
E
LEMENTS FROM A
P
LAYLIST
To delete a playlist element in a playlist using the Remote Panel, proceed as
follows:
1. While you are in Playlist Edit mode, scroll within the playlist to the element
that needs to be deleted.
If the Browse mode is active, the first frame will appear on the display as
each clip is scrolled through.
2. Select Delete from the Playlist Edit menu.
The selected element will be removed from the playlist. A confirmation message
will appear if that option has been enabled in the Setup menu.