EVS XSnano Version 11.01 - November 2012 Configuration Manual - Manual (Page 129)

List Remote CAM
Description Allows access to the CAM recorders of the remote server
specified in the XNet field.
Values • Yes, meaning that the recorders of the local server and the
remote server are available.
• No, meaning that only the recorders of the local server are
available.
Default value No
SONY Parallel Status
Description Activates the Sony serial connection status reporting when
several controllers are used in parallel mode.
Values Yes / No
Default value Yes
3.7.4. RS422 VarID Settings
Introduction
The RS422 VarID settings and the VDCP visibility settings display the read-only VarID
settings.
These fields are available in the following interfaces:
• in the Multicam Configuration window, Protocol tab, on page 2 in the advanced display
mode in the server- and web-based interfaces.
Warning
The VDCP visibility settings are only available if the license code 119, required
to work with the VDCP protocol, is valid.
119 3. Multicam Configuration
EVS Broadcast Equipment S.A. - November 2012 Issue 11.01.B