Phase definition settings, Introduction – EVS XSnano Version 11.01 - November 2012 Configuration Manual User Manual
Page 74

Bitrates and Horizontal Resolution in HD 720p / 1080i
HD 1080i
50 Hz
HD 1080i
59.94 Hz
HD 720p
50 Hz
HD 720p
59.94 Hz
Codec Type
DVCPro HD
Bitrate
100 Mbps
Default bitrate
100 Mbps
Horizontal Resolution
1440
1280
960
Note
The dynamic bitrate management system modifies compression tables for each
recorded field to keep the bitrate of the encoded stream as close as possible to
the target. A higher bitrate means better picture quality and less storage capacity
but a higher bandwidth is required. Improper values can lead to exceed disks
performance, causing frozen pictures during playback.
3.3.3.
Phase Definition Settings
Introduction
The Phase Definition settings are available on the Server tab in the server-based
application (1st page) and web-based interface in the advanced mode.
The Phase Definition settings are highlighted in the screenshot of the server-based
application shown below:
XSnano Server - Version 11.01 - Configuration Manual
3. Multicam Configuration
64