EVS INSIO Version 1.1 - October 2010 User's Manual - Manual (Page 37)

Issue 1.1.B INSIO Version 1.1 – User Manual
EVS Broadcast Equipment – October 2010
28
How to Select EVS Server Player Channels
To be able to select player channels from EVS server, proceed as follows:
1. In the Review Setup tab of the User > Predefined Configurations window, tap
the SDI channel button.
A dialog box opens:
2. Select an EVS server from the drop-down list as well as a configuration and
an output channel.
Note
Configuration corresponds to the configuration defined in the
Setup > System > Video Server tab.
3. Tap .
The server player channel is displayed in the list.
4. Repeat steps 1 to 3 for all the player channels.
5. Organize your server player channels by
• tapping the button to move the channel to the next line
• tapping the button to move the channel to the previous line.
To remove a server player channel, select it and tap the button.