EVS INSIO Version 1.1 - October 2010 User's Manual User Manual
Page 98
INSIO Version 1.1 – User Manual
EVS Broadcast Equipment – October 2010
Issue 1.1.B
89
1.
Tap the Administrative Tasks button
in the upper left corner of the
Record/Review window.
The Administrative Tasks dialog box opens.
2.
Tap the View Input button. It becomes active:
3.
Tap the Exit button
to exit the window.
4.
Load the trains on Software Player channels in the same way as the loading
of clips.
Load the trains one by one by selecting the camera/recorder channel line in
the Record tab, then the Software Player channel line in the Review tab and
finally tap the Load Input button
.
5.
Load the trains on preset of Software Player channels by tapping the
Display Preset button
and selecting a Preset configuration from the
list.
Trains are loaded on the Software Player channels from the Preset
configuration.
6.
You can unload a train by selecting the line in the Review tab and tapping
the Unload Input button.
7.
To de-activate the View Input function, repeat steps 1 to 3.