How to record a stream – EVS INSIO Version 1.1 - October 2010 User's Manual User Manual
Page 74
INSIO Version 1.1 – User Manual
EVS Broadcast Equipment – October 2010
Issue 1.1.B
65
H
OW TO
R
ECORD A
S
TREAM
To record stream(s), proceed as follows:
1.
Select the episode you want to work on from the drop-down list in the
Episode field or with the Episode
buttons.
2.
Select the scene you want to work on from the drop-down list in the Scene
field or with the Scene
buttons.
3.
You can select which cameras will be active when recording a take.
From the list of cameras,
•
deselect the cameras you do not want to record the take by clearing the
check box on the corresponding line(s)
•
select the cameras you want to record the take by selecting the check box
on the corresponding line(s)
OR
•
tap the Check All button to select all the cameras.
4.
Tap the Start/In button to start recording the stream(s).
The stream is not saved on the server and is directly sent to the transfer
destination defined in Setup > User > Predefined Configurations >
Format, Name & Destination.
5.
Tap the Stop/Out button to stop the recording of the stream(s).