EVS IPDirector Version 5.9 - January 2011 Part 6 User’s Manual - Manual (Page 131)

Issue 5.9.B IPDirector Version 5.9 – User Manual – Part 6: Playout – Playlist Panel
EVS Broadcast Equipment – January 2011
120
Configure END CUE Parameters window is displayed.
3. Enter the END CUE duration, i.e. how long before the break the GPI should
be sent, and GPI parameters (number, type and pulse duration).
4. Press the OK button.
The END CUE mode is activated for the channel.
Notes
To deactivate the activated END CUE mode, either
• right-click the END CUE area and select Deactivate END CUE in the
END CUE contextual menu or
• double-click the END CUE area.
How to Configure the END CUE Parameters
It is possible to modify the END CUE parameters defined for a channel. To do so,
proceed as follows:
1. Right-click the END CUE area.
The END CUE contextual menu is displayed.
2. Select Configure END CUE parameters from the contextual menu.
The Configure END CUE Parameters window is displayed.
3. Update
• the END CUE duration,
• the GPI parameters: GPI number, GPI type and pulse duration.
4. Press the OK button.
The END CUE configuration is modified.