How to modify a live or delayed train, Live – EVS IPDirector Version 5.9 - January 2011 Part 6 User’s Manual User Manual
Page 83
Issue 5.9.B
IPDirector Version 5.9 – User Manual – Part 6: Playout – Playlist Panel
EVS Broadcast Equipment – January 2011
72
4.
Do one or both of the following possibilities:
•
Define a new TC IN and press the Mark IN button.
•
Define a new TC OUT and press the Mark OUT button.
5.
Press the UPDATE ELEMENT button.
The element is modified in the playlist and the corresponding information is
updated both in the Control Panel and in the playlist.
Note
If the original record train is still available, pressing the Ret button in the
Control Panel will load the media on the same frame than the loaded clip.
This will allow retrieving media outside the original clip boundaries.
H
OW TO
M
ODIFY A
LIVE
OR
D
ELAYED
T
RAIN
If a live or delayed train is present in the playlist, the user can modify it.
To do so, proceed as follows:
1.
Right-click the element corresponding to the train in the playlist grid.
The Playlist Element contextual menu opens.
2.
Select Modify LIVE or Delay from the menu.
The Insert LIVE or Delay is displayed with the information entered for the
selected element.
3.
Modify the information for the element.
4.
Click the OK button.
The element is modified in the playlist.