EVS IPDirector Version 6.0 - November 2012 Part 4 User's Manual - Manual (Page 15)

User Interface
Element
Description
Mark IN button Sets an IN point at the timecode shown in the Current
Timecode field.
Mark OUT button Sets an OUT point at the timecode shown in the Current
Timecode field.
Timecode Fields Display
Information displayed in the Time Information fields can be changed as follows:
1. Right-click the Timecode field.
A contextual menu is displayed with the following options:
◦ Timecode
◦ Timecode and date
2. Select one of the options.
1.3. Managing Recorder Channels
1.3.1. Recorder Panel Use Depending on EVS Video
Server Mode
LSM Mode
If an EVS video server is in LSM base mode, the Recorder Panel is for information only.
Each recorder channel starts recording from server start up and continues in a loop record
mode. The recorder channel cannot be started or stopped from an IPDirector workstation
and the Recorder Panel will show the current recording timecode and its record status.
IPDP Spotbox mode
If the EVS video server IPDP Spotbox mode is used, the Recorder Panel buttons can be
used and recorder channels can be started or stopped using this panel.
IPDirector - Version 6.00 - User Manual - Ingest Modules
1. Recorder Panel 5