Opening ingest scheduler, User interface, Overview of the ingest scheduler window – EVS IPDirector Version 6.0 - November 2012 Part 4 User's Manual User Manual
Page 20

•
In IPDP Spotbox mode, the Rec Auto Start parameter is normally set to "ON" in the
Channels Configuration window (AVCFG) of the EVS video server to start the
recorders when the system boots up.
In both modes, it is possible to manually start or stop the recorder channels independently
of the Ingest Scheduler.
2.1.2.
Opening Ingest Scheduler
To open Ingest Scheduler, select the corresponding icon
on the
IPDirector Application bar. The Ingest Scheduler window will populate with all visible
recorder channels from the managed XNet network. Only recorders selected to be visible
to the user will be displayed.
See section "Possible Ways to Start to Record a Growing Clip" on page 31 for alternative
ways to open the Ingest Scheduler.
2.2.
User Interface
2.2.1.
Overview of the Ingest Scheduler Window
The Ingest Scheduler window contains the main areas highlighted on the following
screenshot and shortly described in the table below.
10
2. Ingest Scheduler
EVS Broadcast Equipment S.A. - November 2012
Issue 6.00.A