EVS IPDirector Version 6.0 - November 2012 Part 4 User's Manual - Manual (Page 60)

Area Description
1. Transport
Functions
pane This pane provides the basic functions to move through a tape media.
See section "Transport Functions Pane" on page 52.
2. Clip
Creation
pane This pane provides the basic functions to create a clip from a tape
media.
See section "Clip Creation Pane" on page 54.
3. Clip
Information
pane This pane allows the users to enter information about the clip to
digitize, to select destination targets, to select the digitize type and to
start the single clip digitization process.
See section "Clip Information Pane" on page 56.
4. Batch List
pane This pane provides the functions to digitize a series of clips at once.
See section "Batch List Pane" on page 59.
5. Status bar The status bar shows the current status of the VTR Control Panel.
Displays of the VTR Control Panel
Introduction
It is possible to work with different displays of the VTR Control Panel depending on the
actions you need to perform.
The selection of the screen display is done with the Pane Display button .
50 3. VTR Control Panel
EVS Broadcast Equipment S.A. - November 2012 Issue 6.00.A