EVS XT3 MulticamLSM Version 11.02 - July 2013 Operation Manual - Manual (Page 194)

Offside Line Mode Activation
To activate the Offside Line mode, you need to set as follows the parameters in the
Operational Setup menu on the Remote Panel:
• Set the Offside Line parameter (p.12.3 F1) to ‘Yes’.
• Set the External Offside parameter (p.12.3 F2) to ‘No’.
Note
When you activate the offside line, you can no longer use a second controller.
9.3.2. Accessing the Offside Line Mode
1. To activate the Offside Line mode, set the following parameters in the Operational
Setup menu on the Remote Panel:
◦ Set he Offside Line parameter (p.12.3 F1) to ‘Yes’.
◦ Set the External Offside parameter (p.12.3 F2) to ‘No’.
Note
When you activate the offside line, you can no longer use a second controller.
2. When the offside line mode is active, the Offside Line option is available from the
operational menu in the PGM/PRV or Multi PGM mode:
Rst Cam Local Sync Prv OFFSIDE
Cam A Cam B
3. Press the SHIFT+D key to access this mode .
184 9. Advanced Control Modes
EVS Broadcast Equipment S.A. Issue 11.02.A July 2013