EVS XT3 MulticamLSM Version 11.02 - July 2013 Operation Manual - Manual (Page 51)

PostRoll
Push Aux Clip Sort->TC PostRoll
>Archive *** Name Cam
This function enables/disables the post-roll mode. "1PGM+PRV Secondary Menu
Controls" on page 23 for more explanations about this mode.
Clip/Cam
Push Aux Clip Sort->TC PostRoll
>Archive *** Name Cam
Pressing the D key will toggle between CAM and CLIP modes on the remote. Please note
that this mode on the remote and on the VGA screens is never synchronized.
• In CAM mode, the Push, Archive, Ranking assignment, Keyword assignment, and
Name functions will apply only to the camera angles of the clip loaded on the
controlled channels.
• In CLIP mode, these functions will apply on all camera angles of the clip.
4.3. Clip Functions on the VGA
4.3.1. VGA Interface - Clip Screen
Standard View
The navigation through the Clip screen, and the various functions available on this screen,
can be performed using the tablet and stylus, or the keyboard shortcuts.
OPERATION MANUAL Multicam LSM 11.02
4. Clip Management 41