Vitek VT-1252 - Manual (Page 8)

8
ENGLISH
it is turned off and has cooled complete-
ly.
• Wipe the iron's outer surface with a damp
cloth and then wipe dry.
• Sediment on the iron sole can be re-
moved with a cloth soaked in vinegar-
water solution.
• After removing sediment, polish the sole
with a dry cloth.
• Do not use abrasive substances to clean
the sole and body of the iron.
• Avoid touching the iron sole with sharp
metal objects.
STORAGE
• Turn the temperature regulator (13) anti-
clockwise till MIN position, set the steam
release regulator (3) to the left position
- steam release OFF position.
• Remove the power plug from the outlet.
• Open the water tank lid (2), turn over the
iron and drain any remaining water from
the water tank (11) (pic. 8).
• Close the lid (2).
• Set the iron vertically and allow it to cool
completely.
• Store the iron vertically.
Delivery set
1. Iron – 1 pc.
2. Water bowl – 1pc.
TECHNICAL CHARACTERISTICS
Power requirements: 220V ~ 50 Hz
Power consumption: 2400 W
Specifications subject to change without
prior notice.
MINIMUM SERVICE LIFE - 3 YEARS
GUARANTEE
Details regarding guarantee conditions can
be obtained from the dealer from whom
the appliance was purchased. The bill of
sale or receipt must be produced when
making any claim under the terms of this
guarantee.
This product conforms to the
EMC-Requirements as laid down
by the Council Directive 89/336/
EEC and to the Law Voltage
Regulation (73/23 EEC)
1252.indd 8 1252.indd 8 16.04.2008 14:51:32 16.04.2008 14:51:32