Longacre 22172 Robic SC-606W Stopwatch - Manual (Page 7)

Page 7 of
7
“Time Out”. You may stop and restart the CDT by pressing “A”. While stopped, the “STOP” indicator
will appear. You may restart the timer by pressing “A” or reset to the original preset time by pressing “B”.
Upon completion of the Countdown time, a beep tone will sound to indicate the end of the time. The beep
tone will sound for 20 seconds if the preset time value is greater that one (1) minute. If the preset time is
less than one (1) minute, then four (4) beeps will signal the completion of the time.
NOTES:
(1) You may mode into other timer functions at any time by pressing “E”.
(2) The preset time can be reset to a new value, any time, the CDT is stopped (“STOP” indicator appears).
(3) In the “CDC” mode, the time counting up will be displayed in 1/10 second resolution. To stop the
count-up timer, press “A”. Then, press “B” to reset to all zeros.