M&C TechGroup EC-30_FD Operator's manual - Manual (Page 27)

27
Gas sampling and gas conditioning technology 3-4.20-ME
18.1 CONNECTING THE COOLING COMPRESSOR
The cooling compressor is connected to the EC automatic control board (Fig. 9). Figure 10 shows the
connection diagram for the compressor.
cable No.1
cable No.2
cable No.3
Condenser
230V 80uF
Part No.:90K1055
115V 160uF
Part No.:90K1060
from EC automatic control electronics
PE green/
yellow
cable Nr.1 from EC automatic control board pin 21
cable Nr.2 from EC automatic control board pin 24
cable Nr.3 from EC automatic control board pin 22
PE green/yellow from EC automatic control board
pin 23
Flat pin terminal Part No.: KS5006
Klixon 230V Part No. : 90K1046
Klixon 115V Part No.: 90K1051
Control line Part No.: KL0002
Connection cable
Part No.: KL0001
Motor breaker
switch:
Cable no. compressor 1 2 3 PE green/yellow
EC automatic control board 21 24 22 23
Figure 10 Connection diagram for compressor