M&C TechGroup SP2400-H Operator's manual - Manual (Page 36)

36 Gas sampling and gas conditioning technology 2-1.1-ME
Figure 18 Wiring plan of control unit 234B
17 MAINTENANCE
The safety instructions specific to the plant and process are to be consulted prior to any maintenance
work !
It is difficult to give any recommendations as to a particular maintenance cycle. Depending on your
process conditions, a meaningful maintenance cycle must be elaborated for the specific application.
An indication that probe-maintenance may be necessary could be shown by a constant decline in the
amount of sample gas in the analysis system.
Probe maintenance is restricted essentially to replacing filter elements and checking seals.
W A R N I N G !
Observe safety related operations specific guidelines for mainte-
nance work !
W A R N I N G !
Aggressive condensate is possible.
Wear protective glasses and proper protective clothing!