Manhattan 525510 Range+ 150N Wireless Adapter - Manual - Manual (Page 26)

26
CONFIGURATION
26
You’ll be prompted to select its WPS connection type:
Push-Button Configuration: Select to use this method to establish a connection.
Display PIN: Select to use this method to establish a connection. With this method,
you’ll see an 8-digit number displayed here. Enter this number on the device
you want to connect to.
Enter PIN: Input the 8-digit PIN number displayed on the device you want to connect
to in the Pin Code field to establish the connection.
Click to establish the connection.
AP Mode
This option allows you to turn your computer into a wireless access point (in this
case, a “soft” AP, made possible by the adapter software) that other wireless
devices can be connected to. Your computer could then share files, provide access
to the local network, and even share an existing Internet connection. When you
activate the AP mode as shown below, the wireless adapter will cease to function
as a regular wireless network adapter.
NOTE: If you’re thinking about activating this mode but the wireless adapter is the
only means for your computer to connect to a network, don’t do it. The AP mode