Manhattan 525473 Wireless 150N PCI Card - Manual - Manual (Page 22)

22
CONFIGURATION
22
Example 2: No Wi-Fi enabled devices are found in the network.
Right-click the laptop icon in the lower left corner to open the menu below.
Scan: Perform an active scan for available Wi-Fi Direct enabled devices.
Enable Quick Connection: Enables the Quick Connection mode.
Enable autonomous GO: Click to make your computer a group owner (GO),
symbolized by . Once this feature is enabled, you need to set the WPA
password. The default value is 12345678. It’s recommended that this be
changed to something more secure. Select the preferred channel for the new
Wi-Fi Direct group and click .