Manhattan 525473 Wireless 150N PCI Card - Manual - Manual (Page 33)

33
CONFIGURATION
33
• MAC Address — Enter a 12-character address without no spaces, dashes or
colons; e.g., 001122334455. (Media access control, or MAC, addresses used
elsewhere can appear in 00:00:00:00:00 or 00-00-00-00-00 formats.) Based on
the MAC address of the wireless client, you can now decide whether to allow or
deny access.
• Add, Delete and Delete All — To add the currently displayed MAC address to
the list, click on the “Add” icon. To remove an address from the list, select it and
click on the “Delete” icon. Remove all MAC addresses on the list by clicking on
“Delete All.” NOTE: The utility will not ask you to confirm this; it deletes the
entries without question. So be careful not to accidentally overwrite a lot of MAC
addresses you may not have meant to delete.
Connected Devices
To display an overview of who is connected to the Soft AP, click on the Connected
Devices icon.
The example below shows one connected client.
To return the wireless adapter to the regular client mode, right-click the icon in the
systems tray and select “Switch to Client Mode.”