Manhattan 130288 Drive Enclosure - Manual - Manual (Page 10)

10
ONE-TOUCH BACKUP FUNCTION
To use any of the features available with this function, be sure the enclosure is
plugged into a USB port on your computer and powered on, and that a backup
drive has been properly loaded in the enclosure. NOTE: Before backing up files
for the first time using this device, it’s recommended that the function parameters
be set on the File Backup Settings screen in the PC Clone EX program.
1. With the PC Clone EX program open and the disk connected to the enclosure
(see Hardware Installation above), press the Backup button on the enclosure.
2. A Files Backup Confirm screen will display. Click Backup to continue.
3. While the backup procedure is in progress, the PC Clone EX icon will flash in
the system tray and a status uplate will display every 10 seconds until the
backup is complete.